rfobasic.freeforums.org
http://rfobasic.freeforums.org/

Machinist from North Carolina on a Mission
http://rfobasic.freeforums.org/machinist-from-north-carolina-on-a-mission-t4946.html
Page 1 of 1

Author:  El-Maquinista [ Sun Mar 12, 2017 12:02 pm ]
Post subject:  Machinist from North Carolina on a Mission

Hi,
My name is Dave and I reside in Eastern North Carolina. A couple of weeks ago, I was unsuccessfully attempting to salvage a couple of old Tandy Pocket Computers. My son asked me why I was wasting my time doing that when there were free apps available for the android that would do so much more. That's how I got introduced to RFO BASIC!.

I'm on a mission to resurrect a software program I wrote during the late 80s and early 90s. It was an aid for calculating hole coordinates, inspecting hole patterns, calculating speeds and feeds, manually turning radii, inspecting tapers, etc... I could awe some of the old school machinists with my little pocket computer.

I still understand the Basic language, I used to do create this program but I need help bringing this thing into the 21st century. I want to change from a question and answer format for inputting variables into questions with multiple choice picture answers. I also want to create a page with a picture legend to list my variables, and a table to enter them into.

Has anyone created a similar type program that I can use to study the code and get up to speed on this? Any suggestions for tutorials, videos, step by step learning for beginners would be greatly appreciated. I'm currently studying Nick Antonaccio's tutorial.

Thanks ahead of time for any help I receive.
Dave

Author:  El-Maquinista [ Sun Mar 12, 2017 2:31 pm ]
Post subject:  Re: Machinist from North Carolina on a Mission

I found Graphic Controls Generator/Handler thread and got some useful info from there. Which is the preferable method for creating a GUI for use with Basic, HTML or Java?
Dave

Author:  mjcoon [ Sun Mar 12, 2017 4:12 pm ]
Post subject:  Re: Machinist from North Carolina on a Mission

El-Maquinista wrote:
I found Graphic Controls Generator/Handler thread and got some useful info from there. Which is the preferable method for creating a GUI for use with Basic, HTML or Java?
Dave

If you have technical queries, best to ask them in the "Questions or comments about BASIC!" sub-forum...

Mike.

Author:  Mog [ Sun Mar 12, 2017 9:00 pm ]
Post subject:  Re: Machinist from North Carolina on a Mission

You found your way around pretty quick then! I think you are on the right track to go with Nick's page. I keep forgetting it exists...!  I loved my little Casio pocket computers... I think Tandy ones were based on that, perhaps re-badged Sharp ones first. I remember the cassette interface, I think it ran at 300 baud and it would beep first a lot (when you listened audio wise) and take an age to load just a few Kb of a program... I think it was just 2K on-board. Whoopee doo!

I don't know what's best for your project. HTML might be a good interface and you could use the GW Library:-

gw-lib-f27.html

I don't know what you mean about Java other than modifying the source code of BASIC!

I did some very basic AutoCAD CNC based stuff when it was in its infancy. Well, I think when my college got the stuff, the funds to do it -- but that was a very long time ago. In the mid-eighties. Alas, I'm lacking in those skills to help.

MoG

(Note how I emphasised the G code on my user name!).

Author:  mougino [ Mon Mar 13, 2017 12:20 am ]
Post subject:  Re: Machinist from North Carolina on a Mission

Hi Dave, and welcome.

You can also use the excellent RFODESIGNER from our friend Emile: rfodesigner-t3869.html

Have fun
Nicolas

Author:  roy [ Mon Mar 13, 2017 12:36 am ]
Post subject:  Re: Machinist from North Carolina on a Mission

Welcome to the forum, Dave

Roy

Author:  El-Maquinista [ Mon Mar 13, 2017 3:53 pm ]
Post subject:  Re: Machinist from North Carolina on a Mission

Thanks for the warm welcome guys! I'm checking out the links now. I've got a steep learning curve ahead of me. I found the search feature, so I can look at stuff by topics.

Author:  luca_italy [ Sun Mar 19, 2017 4:30 pm ]
Post subject:  Re: Machinist from North Carolina on a Mission

Hi,

For GUIs I recommend GW Lib:
http://rfobasic.freeforums.org/gw-lib-f27.html
http://mougino.free.fr/rfo-basic/

Luca

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/